What are the daily maintenance items of ice cream machine?

by:Hommy     2020-05-23
??1. Cleaning of refrigeration cylinder of ice cream machine ??In order to ensure the health of ice cream consumers and increase the service life of ice cream machine parts, you need to clean the refrigeration cylinder once a day. ??1. Press the cleaning button to discharge all the slurry in the material tank, and press the stop button. ??2. Add appropriate amount of disinfectant with warm water and pour it into the bucket, the same amount of water in the two buckets. ??3. Press the cleaning button and stir for about 1-2 minutes to drain the cleaning solution. ??4. Rinse with water for 2-3 times and stop. ??5. Turn off the power and disassemble and wash all parts. ??6. Unscrew the four screws on the side of the discharge valve and remove the discharge valve assembly. ??7. Withdraw the handle pin, handle, stem and seal ring from the discharge valve in sequence. ??8. Pull out the agitator from the refrigeration cylinder and remove the sealing ring. ??9. Clean all the removed parts, and replace them in time if they are damaged. ??10. Install the parts according to the reverse steps of disassembly. ??2. Cleaning the body of the ice cream machine ??Consumers need a beautiful and clean ice cream machine. Please keep the appearance of the body clean at any time. You can wipe the body with a warm towel to remove stains. Do not rinse with water to avoid electrical failure. ??3. Cleaning the condenser of ice cream machine ??After working for a period of time, the condenser will stick to dust and affect the heat dissipation, and the cooling effect is poor. The specific cleaning time can vary from three months to six months depending on the operating environment. Before cleaning, turn off the power of the ice cream machine. Make sure not to damage the condenser fins. Brush and hair dryer can be cleaned up. ??4. Ice cream machine belt adjustment ??After the ice cream machine is used for a long time, the driving belt of the mixing system may be elongated and needs to be adjusted. The phenomenon is that the belt slips. After the ice cream machine runs for a while, it suddenly stops. Some soft ice cream machine digital tubes will display the word 'NL' at the same time. The buzzer emits a regular intermittent sound for a long time. At this time, disconnect the power supply, remove the left side panel of the machine, and use a wrench to adjust the screws fixed under the motor (the specific situation is slightly different due to different models of ice cream machine, please call the after-sales phone Consultation) This situation is not a malfunction of the machine. Before adjusting the belt, the machine must be shut down and powered off. After the belt is adjusted properly, the machine will return to normal.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...